Refurbished EHPS Pump for Seat Cordoba II (6L2)
Professionally refurbished electro-hydraulic power steering (EHPS) pump for Seat Cordoba II (6L2). This is a reliable replacement solution for vehicles with heavy steering, intermittent power-steering assistance or an EHPS fault warning.
Professionally refurbished and tested
Each pump is carefully rebuilt using quality electrical components, bearings, seals and hydraulic parts where required. Before dispatch, every unit is tested on professional diagnostic equipment to confirm correct electrical operation, hydraulic pressure and flow.
Key specifications
- Primary OEM reference: 6Q0423156AA
- Vehicle platform: Seat Cordoba II (6L2)
- Pump type: Electro-hydraulic power steering (EHPS)
- Manufacturer: KOYO
- Warranty: 24 months
- Fitment check: Original part number and pump manufacturer must be verified before ordering
Compatible part numbers
Please compare the part number and manufacturer on your original pump before ordering. Compatible references include:
6Q0423155AA, 6Q0423155AD, 6Q0423155AG, 6Q0423155AH, 6Q0423155AJ, 6Q0423155AL, 6Q0423155AM, 6Q0423155L, 6Q0423155X, 6Q0423156AA, 6Q0423156AD, 6Q0423156K, 6Q0423156L, 6Q0423156R, 6Q0423162X.
If your part number is not listed, contact us before ordering.
Important compatibility information
For Volkswagen Group vehicles, the VIN number alone cannot reliably identify the installed EHPS pump. Please physically check the pump fitted to your vehicle before ordering and confirm whether it is a KOYO/HPI or TRW unit.
If your vehicle has a TRW pump, also check the electrical connectors: some versions use three active connectors, while others use two active connectors and one blanked connector.
Before installation
Flush the hydraulic system and use fresh, manufacturer-approved steering fluid. Proper bleeding of the steering system after installation is essential for quiet and reliable operation.
Not sure whether this pump fits your vehicle? Contact us with your vehicle details, the part number from your original pump and photos of its connectors. We will help you verify compatibility before purchase.
Seat Cordoba (6L2)
| Engine | Engine code | Produced | kW | hp | ccm |
| 1.2 | AZQ, BME | 2002/10 – 2006/06 | 47 | 64 | 1198 |
| 1.2 12V | BXV | 2006/05 – 2009/11 | 51 | 70 | 1198 |
| 1.4 16V | BBY, BKY | 2002/09 – 2007/12 | 55 | 75 | 1390 |
| 1.4 16V | BBZ | 2002/10 – 2009/11 | 74 | 100 | 1390 |
| 1.4 16V | BXW | 2006/05 – 2009/11 | 63 | 86 | 1390 |
| 1.6 16V | BTS | 2006/11 – 2009/11 | 77 | 105 | 1598 |
| 2.0 | AZL, BBX | 2002/09 – 2009/11 | 85 | 115 | 1984 |
| 1.4 TDI | AMF | 2002/10 – 2005/12 | 55 | 75 | 1422 |
| 1.4 TDI | BNM | 2005/05 – 2009/11 | 51 | 70 | 1422 |
| 1.4 TDI | BMS, BNV | 2005/06 – 2009/11 | 59 | 80 | 1422 |
| 1.9 TDI | ATD, AXR, BMT | 2002/09 – 2009/11 | 74 | 100 | 1896 |
| 1.9 SDI | ASY | 2002/09 – 2009/11 | 47 | 64 | 1896 |
| 1.9 TDI | ASZ, BLT | 2002/10 – 2009/11 | 96 | 131 | 1896 |
Product FAQ
How do I confirm that this EHPS pump fits my vehicle?
Please compare the part number and pump manufacturer on your original unit with the information shown on this page. If you are unsure, send us your vehicle details, the original part number and photos of the pump connectors before ordering.
Can I identify the correct EHPS pump by VIN number?
No. For Volkswagen Group vehicles, the VIN number alone cannot reliably identify the installed pump. You must physically check whether your vehicle has a KOYO/HPI or TRW pump.
Does the steering system need to be bled after installation?
Yes. The hydraulic system should be properly bled after installation to remove trapped air and ensure smooth, quiet power-steering operation. We also recommend flushing the system and using fresh, manufacturer-approved hydraulic fluid.
Need more help? Find answers to common questions about EHPS pumps, compatibility, installation and repairs in our complete FAQ.







